FOR RESEARCH USE ONLY. The content provided in this article is for educational and informational purposes only and is based on published scientific literature. The compounds discussed are not approved by the FDA for human or veterinary use. They are strictly intended for laboratory research and in vitro experimentation. Pure Health Peptides does not endorse or encourage the use of these products outside of a controlled research setting.
Kisspeptin-10 is a synthetic decapeptide studied in neuroendocrine research for a single, well-defined interaction: the way it engages its receptor, KISS1R, also known as GPR54. That receptor sits at an upstream control point in the neuroendocrine axis, which is why kisspeptin peptides are a standing research subject in the study of that signaling system.
From there, this piece works through the decapeptide’s structure, its action at KISS1R, where it fits among the catalog’s other neuroendocrine tools, and the verification standing behind each lot.
Research Snapshot
- Kisspeptin-10 is a synthetic decapeptide, the ten-residue C-terminal fragment of the larger kisspeptin protein, with the molecular formula C63H83N17O14 and a molecular weight of approximately 1302.45 g/mol. Its sequence is Tyr-Asn-Trp-Asn-Ser-Phe-Gly-Leu-Arg-Phe-NH2.
- It terminates in an Arg-Phe-amide (RF-amide) motif, the structural feature that defines the kisspeptin family and is required for engaging the receptor.
- It is studied as an agonist at KISS1R (GPR54), a G-protein-coupled receptor, in defined in vitro and preclinical systems, where KISS1R sits upstream in the neuroendocrine signaling axis.
- In the neuroendocrine research toolkit, Kisspeptin-10 is studied alongside other signaling peptides such as Gonadorelin, which acts further along the same axis, and it shares the catalog’s reproductive and neuro-endocrinology research area with compounds like Prostamax.
- Pure Health Peptides supplies Kisspeptin-10 as a lyophilized Vial in 5 mg and 10 mg sizes, part of the wider catalog. Every lot is finished and tested in the US, routed through independent, ISO/IEC 17025-accredited testing by Ethos Analytics as the exclusive testing partner.
Introduction
Kisspeptin began as a cancer-biology discovery. The gene that encodes it, KISS1, was first identified as a metastasis-suppressor, and the peptide it produces was later found to be the natural ligand of an orphan receptor then called GPR54.
That pairing, a peptide and its receptor, is what turned kisspeptin into one of the most studied signaling molecules in neuroendocrine research.
The account stays with the Kisspeptin-10 research fragment and the receptor-level work built on it, framed in the in vitro and preclinical terms the literature uses and nothing beyond them.
The Kisspeptin-10 Decapeptide
Structurally, Kisspeptin-10 is the active C-terminal fragment of a larger parent peptide. The KISS1 gene product is processed into kisspeptin peptides of several lengths, and the shared, receptor-active region is the final ten residues.
Supplying that ten-residue fragment, Kisspeptin-10, gives researchers the minimal sequence that still engages the receptor, with the molecular formula C63H83N17O14 and a molecular weight near 1302.45 g/mol.
The defining structural feature sits at the C-terminus: an arginine-phenylalanine-amide, or RF-amide, motif. The kisspeptins belong to the broader RF-amide peptide family, and that amidated C-terminal motif is the part of the molecule required for high-affinity receptor engagement.
Because the fragment is a defined synthetic sequence, its identity is straightforward to confirm by mass spectrometry against its theoretical mass, which is the basis of lot-level verification.
KISS1R (GPR54) Signaling in the Neuroendocrine Axis
The mechanism that defines Kisspeptin-10 is its action at KISS1R.
The receptor, originally the orphan GPCR GPR54, was paired with kisspeptin as its endogenous ligand in 2001, and that identification established the signaling relationship researchers now study (Kotani et al., 2001; Ohtaki et al., 2001). When a kisspeptin ligand engages KISS1R, it activates the Gq/phospholipase-C second-messenger signaling associated with that receptor, which is the process examined in receptor-level studies.
KISS1R is expressed on neurons that sit upstream in the neuroendocrine axis, which is why kisspeptin signaling is characterized as an upstream regulatory input in that system (Pinilla et al., 2012). Research in this area uses Kisspeptin-10 as a defined agonist to probe receptor binding, signaling output, and structure-activity relationships across kisspeptin fragments.
All of this is described in the in vitro and preclinical terms the literature uses, as receptor and signaling research rather than any applied use.
Kisspeptin-10 in the Neuroendocrine Research Toolkit
Kisspeptin-10 is most useful understood in relation to its neighbors. Gonadorelin is a signaling peptide that acts further along the same neuroendocrine axis, so the two are often studied together as upstream and downstream reference points in that system.
Within the catalog’s reproductive and neuro-endocrinology research area, Prostamax is a short peptide bioregulator studied in a different but adjacent context. Each is a distinct molecule with its own receptor or mechanism, and the research value comes from holding them side by side.
Held together, these give a research program several defined entry points into neuroendocrine signaling: a KISS1R agonist (Kisspeptin-10) at an upstream control point, and signaling peptides that act elsewhere in the same broad system.
Kisspeptin-10 is the KISS1R reference among them, supplied as its own lyophilized vial and a distinct tool rather than a substitute for another.
Verification
Underneath the compound is the verification chain. Pure Health Peptides does not manufacture the material; production is sourced from qualified third-party manufacturers, and the material is finished and tested in the US.
Every lot is routed through independent, ISO/IEC 17025-accredited testing by Ethos Analytics as the exclusive testing partner, and each qualified lot’s Certificate of Analysis is published in the COA Library, in the vial section, retrievable by batch ID. For a lyophilized vialed peptide the appropriate panel extends beyond identity, purity, and quantity to include endotoxin and microbial limits, because contamination can enter downstream of synthesis through handling, lyophilization, vial filling, storage, and transit.
The Testing Process page documents how that verification runs, and the Manufacturing Process page covers where the material comes from.
Where Kisspeptin-10 Sits in Neuroendocrine Research
For researchers studying neuroendocrine signaling, Kisspeptin-10 is a specific and well-defined tool: the minimal receptor-active fragment of the kisspeptin peptide, engaging KISS1R at an upstream point in the axis.
Its research value rests on that precision, a defined agonist for a single well-characterized receptor, and on the contrast it provides against the other signaling peptides that act elsewhere in the same system.
As research on KISS1R signaling continues, Kisspeptin-10 remains a core reference peptide, and it holds a clear place in the neuroendocrine cluster in the catalog.
Frequently Asked Questions
What is Kisspeptin-10?
Kisspeptin-10 is a synthetic decapeptide, the ten-residue C-terminal fragment of the kisspeptin protein, with the molecular formula C63H83N17O14 and a molecular weight of approximately 1302.45 g/mol. Its sequence is Tyr-Asn-Trp-Asn-Ser-Phe-Gly-Leu-Arg-Phe-NH2. It is characterized here as a defined research reference material.
What is Kisspeptin-10 studied for in research?
It is studied as an agonist at the receptor KISS1R (GPR54), a G-protein-coupled receptor, in defined in vitro and preclinical systems. The interest is in receptor binding, signaling output, and structure-activity relationships across kisspeptin fragments.
What is the difference between kisspeptin and Kisspeptin-10?
Kisspeptin refers to the family of peptides produced from the KISS1 gene, which exist in several lengths. Kisspeptin-10 is the ten-residue C-terminal fragment, the shortest form that retains the receptor-active RF-amide motif, which is why it is used as the defined research fragment.
What are Kisspeptin-10’s chemical specifications, and what size does it come in?
Kisspeptin-10 has the molecular formula C63H83N17O14 and a molecular weight of approximately 1302.45 g/mol (refer to the lot-specific Certificate of Analysis for the exact value). It is supplied as a lyophilized powder in 5 mg and 10 mg vials.
What carrier format is Kisspeptin-10 available in, and how is it verified?
A lyophilized vial. Every lot is finished and tested in the US and routed through independent, ISO/IEC 17025-accredited testing by Ethos Analytics, with a lot-specific Certificate of Analysis published in the COA Library.
References
- Kotani M, et al. The metastasis suppressor gene KiSS-1 encodes kisspeptins, the natural ligands of the orphan G protein-coupled receptor GPR54. Journal of Biological Chemistry, 2001;276(37):34631-34636. https://doi.org/10.1074/jbc.M104847200
- Ohtaki T, et al. Metastasis suppressor gene KiSS-1 encodes peptide ligand of a G-protein-coupled receptor. Nature, 2001;411(6837):613-617. https://doi.org/10.1038/35079135
- Pinilla L, Aguilar E, Dieguez C, Millar RP, Tena-Sempere M. Kisspeptins and reproduction: physiological roles and regulatory mechanisms. Physiological Reviews, 2012;92(3):1235-1316. https://doi.org/10.1152/physrev.00037.2010
- International Organization for Standardization / International Electrotechnical Commission. ISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories. https://www.iso.org/standard/66912.html



